DETERMINING BOLT CIRCLE DIAMETER
FOR 4, 6, 8, AND 10 LUG BOLTS
(NUMBERS DENOTE PROPER TORQUEING SEQUENCE)
To determine the bolt circle, measure from the center of one stud hole directly across the center of the wheel, to the center of the opposite stud hole (see diagrams). Measurement should equal the bolt circle diameter.
FOR 5 LUG BOLTS
To determine the bolt circle, measure from the center of one stud hole, skipping the adjacent hole, to the center of the furthest stud hole (see diagram). The measurement will be slightly smaller than the actual bolt circle diameter, but may be converted to the bolt circle diameter using the table located below.
CONVERTING MILLIMETERS TO INCHES:
Divide millimeters by 25.4 (I.e. 114mm divided by 25.4 equals 4.488 inches).
CONVERTING INCHES TO MILLIMETERS:
Multiply inches by 25.4 (I.e. 4.5 Inches x 25.4 equals 114.3mm).
| WHEEL MATE APPLICATIONS CHART | |
|
*Wheel Mates are sold in sets of 4 only. |
|
| Model No. | Applications: |
| 4504 | 4 Hole - on 4"/100mm, 4.25"/108mm, and 4.50"/114mm bolt circles. |
| 4505 |
5 Hole - on 4"/100mm, 4.25"/108mm, 110mm, 112mm, 4.50"/114mm, 115mm, 4.75"/120mm, and 5"/127mm bolt circles. (with 12mm studs) |
| 4506 | 5 Hole - on a 5"/127mm and 130mm bolt circles. (with 1/2" or 14mm studs) |
| 6 Hole - on a 4.50"/114mm and 5"/127mm bolt circles. | |
| 4507 |
5 Hole - on 5.50"/139.7mm, 135mm, and 150mm bolt circles. |
| 6 Hole - on a 5.50"/139.7mm and 135mm bolt circles. | |
| 7 Hole - on 150mm bolt circle. | |
|
4508 |
8 Hole - on 6.50"/165.1mm or 170mm bolt circles. |
| * Please consult the Owner's Manual for the manufacturers' suggested torqueing specifications. |
| Tighten lug nuts per the sequencing order shown on the above diagrams. |
| Always follow the manufacturers' stated specifications. |
NOTE: For all applications, re-torque lug nuts after the initial 25 miles of driving and at 100 mile intervals until manufacturers' specified torque remains constant.
Applications Installation Instructions Determining Bolt Pattern